Weekly Meeting 2/12/18

Staffing through this year -

  • Who will be around over spring and summer?
  • Danni not able to work this semester
  • Few new people have expressed interest in joining
Progress on John's project

Progress on TJ's project

Progress on training videos

Polar slicing lit review?
More to do on DFX course?

New subproject - printing conductive pathways 
  • Links into TJ's project
  • Need to get MultiMaterial up and running
  • Test the conductive filament we ordered
    • What materials does it work well with?
    • How to print well?
    • Electrical properties?
  • Find what other options are available
  • Lit Review
    • https://www.shapeways.com/forum/t/conductive-3d-printing-sheet-materials.18588/
    • https://www.kickstarter.com/projects/1597902824/agic-print-printing-circuit-boards-with-home-print
    • http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0049365
    • https://malta3dprinting.co/tag/printing-conductive-paths/
    • http://additivemanufacturing.com/tag/conductive-paths/
Solid Freeform Fabrication Symposium
  • Austin TX, August 13-15
  • Can hopefully get funding to fully or partially cover students going
  • Abstracts due April 16th
  • Draft papers due July 2

Comments

Post a Comment

Popular posts from this blog

3D printing videos

This week Emily, Danni and I were able to meet with Grant from the Venture Lab and talked about how we could make education videos for the AMP an Venture Lab. Emily and I made a list of topics we should talk about in the videos. Emily and I started writing scripts for each topic to be made into videos. Below is example of our scripts. Unloading and Loading Filament Whenever you want to change colors, materials, or just start a new roll of filament, you have to unload your current filament and load a new one. First, turn on the Prusa with the switch on the side as shown. Then, we’re going to pre-heat the nozzle. Scroll down to the preheat option and click. Pick the material you’re unloading from the list of options. When the nozzle has had a minute or two to heat up, we can unload the filament. Hold on to the filament tightly, and scroll down to the “unload” option on the printer. When you press it, the filament will start to get pushed out. Make sure you help it along...
Read more

Weekly Meeting 11/14

Jason - Install meshmixer on computer, order soluble support material Louisa, Emily, Danni - making training videos for Venture Factory, Additive module for "Design for X" class, lit research on existing papers on design guidelines for FDM and metal
Read more

Weekly meeting 12/12

Tasks for Christmas Break! Jason Order green and yellow pla, conductive filament Send whenisgood for next semester Bring down books for DFX course Bring down TPU flex filament Find additional project ideas Emily Polar coordinate slicing lit review Danni Put together proposal for prosthetic project Louisa and Emily Keep honing tensile specimens and procedure Begin researching DFX Louisa, Emily, Danni Finish training videos TJ Finish enclosure and test printing ABS and CF/ABS with Louisa and Emily Lit Review Prospectus John Find ASTM standards for metal tensile and torsion testing Design specimens and send to Rob and Jason Jones Lit Review
Read more